====== Ghost Kit Build Instructions ====== [[http://lowvoltagelabs.com/products/ghost-kit/]] **Step 1** - Check that all the parts were included with the kit Step 1 - Check that all the parts were included with the kit **Step 2** - Install the battery holder with the opening to the left Step 2 - Install the battery holder with the opening to the left **Step 3** - Check battery holder orientation Step 3 - Check battery holder orientation **Step 4** - Install LEDs D1 and D2 with the longer lead to the positive (+) side Step 4 - Install LEDs D1 and D2 with the longer lead to the positive (+) side **Step 5** - Fold the leads of the parts over as you install them to hold them in place Step 5 - Fold the leads of the parts over as you install them to hold them in place **Step 6** - Install the resistors R1 and R2 Step 6 - Install the resistors R1 and R2 **Step 7** - Install the swtich S1 Step 7 - Install the switch S1 **Step 8** - Flip over the ghost and solder the parts Step 8 - Flip over the ghost and solder the parts **Step 9** - Install the ring to the top of the ghost Step 9 - Install the ring to the top of the ghost **Step 10** - Install a 2032 battery with the positive side up Step 10 - Install a 2032 battery with the positive side up **Step 11** - Turn on the switch and watch the green LEDs flash Step 11 - Turn on the switch and watch the green LEDs flash