Low Voltage Labs Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Pumpkin Kit Build Instructions ======
[[http://lowvoltagelabs.com/products/pumpkin-kit/]]

**Step 1** - Check that all the parts were included with the kit
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981425124/" title="Step 1 - Check that all the parts were included with the kit by Low Voltage Labs, on Flickr"><img src="http://farm3.staticflickr.com/2890/9981425124_12c80a9f89_c.jpg" width="800" height="641" alt="Step 1 - Check that all the parts were included with the kit"></a>
</html>

**Step 2** - Find the resistor

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981426124/" title="Step 2 - find the resistor by Low Voltage Labs, on Flickr"><img src="http://farm3.staticflickr.com/2853/9981426124_e9ef495e57_c.jpg" width="641" height="800" alt="Step 2 - find the resistor"></a>
</html>

**Step 3** - install the resistor into location R1 

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981540823/" title="Step 3 - install the resistor into location R1 by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5483/9981540823_6959397011_c.jpg" width="641" height="800" alt="Step 3 - install the resistor into location R1"></a>
</html>

**Step 4** - find the switch

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981408645/" title="Step 4 - find the switch by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5523/9981408645_f750bc047c_c.jpg" width="641" height="800" alt="Step 4 - find the switch"></a>
</html>

**Step 5** - Install the switch into location S1

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981544383/" title="Step 5 - install the switch into location S1 by Low Voltage Labs, on Flickr"><img src="http://farm4.staticflickr.com/3768/9981544383_d1700f4cb0_c.jpg" width="800" height="640" alt="Step 5 - install the switch into location S1"></a>
</html>

**Step 6** - Find the battery holder

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981545873/" title="Step 6 - find the battery holder by Low Voltage Labs, on Flickr"><img src="http://farm8.staticflickr.com/7424/9981545873_74c95b50f7_c.jpg" width="641" height="800" alt="Step 6 - find the battery holder"></a>
</html>

**Step 7** - Install the battery holder into location BT1

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981435074/" title="Step 7 - install battery holder into location BT1 by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5478/9981435074_365473e20d_c.jpg" width="641" height="800" alt="Step 7 - install battery holder into location BT1"></a>
</html>

**Step 8** - Find the 10mm LED

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981549723/" title="Step 8 - find the 10mm LED by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5463/9981549723_7040265a1f_c.jpg" width="800" height="641" alt="Step 8 - find the 10mm LED"></a>
</html>

**Step 9** - Install LED into location D1 with the longer lead of the LED into the square pad

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981552493/" title="Step 9 - install LED into location D1 with the longer lead of the LED into the square pad by Low Voltage Labs, on Flickr"><img src="http://farm4.staticflickr.com/3678/9981552493_0dc7abd2f1_c.jpg" width="800" height="640" alt="Step 9 - install LED into location D1 with the longer lead of the LED into the square pad"></a>
</html>

**Step 10** - Turn over the printed circuit. Bend the leads of the parts to hold them in place.

<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981443844/" title="Step 10 - turn over the printed circuit. Bend the leads of the parts to hold them in place. by Low Voltage Labs, on Flickr"><img src="http://farm3.staticflickr.com/2866/9981443844_b63a34f427_c.jpg" width="800" height="639" alt="Step 10 - turn over the printed circuit. Bend the leads of the parts to hold them in place."></a>
</html>

**Step 11** - Solder the parts to the board
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981559913/" title="Step 11 - solder the parts to the board by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5460/9981559913_1f4d88784e_c.jpg" width="800" height="639" alt="Step 11 - solder the parts to the board"></a>
</html>

**Step 12** - Install a 2032 battery with the + side up. Turn on the switch and watch the LED flicker!
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/9981605916/" title="Install a 2032 battery with the + side up. Turn on the switch and watch the LED flicker! by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5472/9981605916_071fdd1e52_c.jpg" width="639" height="800" alt="Install a 2032 battery with the + side up. Turn on the switch and watch the LED flicker!"></a>
</html>