Low Voltage Labs Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Snowman Kit Build Instructions ======
[[http://lowvoltagelabs.com/products/snowman-kit/]]

**Step 1** - Check that all the parts were included with the kit
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845527233/" title="Step 1 - Check that all the parts were included with the kit by Low Voltage Labs, on Flickr"><img src="http://farm4.staticflickr.com/3686/10845527233_9d730c765e_c.jpg" width="800" height="600" alt="Step 1 - Check that all the parts were included with the kit"></a>
</html>

**Step 2** - Install the battery holder with the opening to the left
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845255266/" title="Step 2 - Install the battery holder with the opening to the left by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5487/10845255266_3c2817b1a3_c.jpg" width="800" height="600" alt="Step 2 - Install the battery holder with the opening to the left"></a>
</html>

**Step 3** - Check battery holder orientation 
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845334744/" title="Step 3 - Check battery holder orientation by Low Voltage Labs, on Flickr"><img src="http://farm3.staticflickr.com/2855/10845334744_0818918c36_c.jpg" width="800" height="600" alt="Step 3 - Check battery holder orientation"></a>
</html>

**Step 4** - Install LEDs D1, D2 and D3 with the longer lead to the positive (+) side
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845520463/" title="Step 4 - Install LEDs D1, D2 and D3 with the longer lead to the positive (+) side by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5544/10845520463_e42658c9dc_c.jpg" width="800" height="600" alt="Step 4 - Install LEDs D1, D2 and D3 with the longer lead to the positive (+) side"></a>
</html>

**Step 5**  - Fold the leads of the parts over as you install them to hold them in place
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845176325/" title="Step 5 - Fold the leads of the parts over as you install them to hold them in place by Low Voltage Labs, on Flickr"><img src="http://farm8.staticflickr.com/7339/10845176325_5a2d8ccda6_c.jpg" width="800" height="800" alt="Step 5 - Fold the leads of the parts over as you install them to hold them in place"></a>
</html>

**Step 6** - Install the resistors R1, R2 and R3
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845324814/" title="Step 6 - Install the resistors R1, R2 and R3 by Low Voltage Labs, on Flickr"><img src="http://farm8.staticflickr.com/7402/10845324814_22e6efea41_c.jpg" width="800" height="599" alt="Step 6 - Install the resistors R1, R2 and R3"></a>
</html>

**Step 7** - Install the swtich S1
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845172715/" title="Step 7 - Install the switch S1 by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5483/10845172715_fb13221aa6_c.jpg" width="800" height="800" alt="Step 7 - Install the switch S1"></a>
</html>

**Step 8** - Flip over the PCB and solder the parts
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845171335/" title="Step 8 - Flip over the PCB and solder the parts by Low Voltage Labs, on Flickr"><img src="http://farm6.staticflickr.com/5530/10845171335_b8f81ff08b_c.jpg" width="800" height="600" alt="Step 8 - Flip over the PCB and solder the parts"></a>
</html>

**Step 9** - Install a 2032 battery with the positive side up
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845507473/" title="Step 9 - Install a 2032 battery with the positive side up by Low Voltage Labs, on Flickr"><img src="http://farm3.staticflickr.com/2807/10845507473_5e10cdf7d2_c.jpg" width="800" height="600" alt="Step 9 - Install a 2032 battery with the positive side up"></a>
</html>

**Step 10** - Turn on the switch and watch the LEDs flash
<html>
<a href="http://www.flickr.com/photos/lowvoltagelabs/10845297786/" title="Step 10 - Turn on the switch and watch the LEDs flash by Low Voltage Labs, on Flickr"><img src="http://farm3.staticflickr.com/2850/10845297786_52001b82dd_c.jpg" width="600" height="800" alt="Step 10 - Turn on the switch and watch the LEDs flash"></a>
</html>