====== Snowman Kit Build Instructions ====== [[http://lowvoltagelabs.com/products/snowman-kit/]] **Step 1** - Check that all the parts were included with the kit Step 1 - Check that all the parts were included with the kit **Step 2** - Install the battery holder with the opening to the left Step 2 - Install the battery holder with the opening to the left **Step 3** - Check battery holder orientation Step 3 - Check battery holder orientation **Step 4** - Install LEDs D1, D2 and D3 with the longer lead to the positive (+) side Step 4 - Install LEDs D1, D2 and D3 with the longer lead to the positive (+) side **Step 5** - Fold the leads of the parts over as you install them to hold them in place Step 5 - Fold the leads of the parts over as you install them to hold them in place **Step 6** - Install the resistors R1, R2 and R3 Step 6 - Install the resistors R1, R2 and R3 **Step 7** - Install the switch S1 Step 7 - Install the switch S1 **Step 8** - Flip over the PCB and solder the parts Step 8 - Flip over the PCB and solder the parts **Step 9** - Install a 2032 battery with the positive side up Step 9 - Install a 2032 battery with the positive side up **Step 10** - Turn on the switch and watch the LEDs flash Step 10 - Turn on the switch and watch the LEDs flash