Differences

This shows you the differences between two versions of the page.

--- flashlight_kit_build_instructions [2014/10/25 07:08] – eric
+++ flashlight_kit_build_instructions [2023/02/28 13:52] (current) – eric
@@ Line 1: / Line 1: @@
 ====== Flashlight Kit Build Instructions ======
 [[http://lowvoltagelabs.com/products/flashligh-kit/]]
 **Step 1** - Check that all the parts were included with the kit.
@@ Line 27: / Line 28: @@
 </html>
-**Step 6** - Assemble the LED and right angle LED holder together, before installing into the PCB.
+**Step 6** - Assemble the LED and right angle LED holder together before installing into the PCB.
 <html>
 <a href="https://www.flickr.com/photos/lowvoltagelabs/15611090955" title="LED and LED holder by Low Voltage Labs, on Flickr"><img src="https://farm6.staticflickr.com/5597/15611090955_346ab823c2_c.jpg" width="800" height="800" alt="LED and LED holder"></a>
@@ Line 47: / Line 48: @@
 </html>
-**Step 10** - Turn over the flashlight and solder the parts on the back.
+**Step 10** - Turn over the flashlight and solder the parts on the back. Even if the battery holder was installed in the kit when received it still needs to be soldered.
 <html>
 <a href="https://www.flickr.com/photos/lowvoltagelabs/14990338354" title="Back side of the flashlight PCB once the parts are installed and ready to solder by Low Voltage Labs, on Flickr"><img src="https://farm4.staticflickr.com/3951/14990338354_db25f07a9b_c.jpg" width="800" height="800" alt="Back side of the flashlight PCB once the parts are installed and ready to solder"></a>